Crystal Structure
Dr. Elmar Langenscheidt
Schwalmstr. 229
41238 Mönchengladbach, Germany
10/09/01
Test report for the “AquaKat” device by Penergetic Int. AG, Kesswil, Switzerland.
Scientific test of the Penergetic AquaKat
Scientific test of the Penergetic AquaKat
July 19, 2011 By
Calcium build up problem solved
July 19, 2011 By
Before AquaKat
The problem: At least every 3 month the pipes in our the cooling system needed to be de-scaled due to calcium build up . The build up of calcium prevented the system working efficiently and caused overheating. 3 months after the installation of Aqua-Kat technology the photos show a distinct improvement in the pipes. They are almost in perfect condition.
World-class athlete
July 19, 2011 By
Oliver Bernhard three-time duathlon world champion
Olivier Bernhard drinks AquaKat water
Born in 1968, Olivier Bernhard turned professional at the early age of 17. He has been duathlon world champion three times, was a multiple Ironman winner and has claimed a number of other national titles. For years this world-class professional has been drinking AquaKat water. He says: “I noticed that drinking AquaKat vitalised water speeds up my recovery and also improves the acid-base balance. As a top athlete these advantages are indispensable for me. I would not like to go without this vitalised water anymore.” Olivier Bernhard goes on to say: “As an athlete I have learned to pursue goals. With discipline and persistence. But I have also learned about the power of vision and benefited from the knowledge of others. Exact analysis, a professional evaluation of these and an action plan based on this were the foundation of my development as an athlete. Only in this way was I able to constantly improve my ability to perform even when others called it ‘quits’. [Read more...]
AquaKat changes water structure
July 19, 2011 By
The French Navy
The French Navy has tested the AquaKat technology in their Toulon base. The aim was to stop the massive problem with limescale deposits within the water supply of the naval base, because water consumption was very irregular. Approximately 27 m³ cold water are needed there daily, on average 23 m³ daily plus a maximum of 8 m³ of warm water (5 m³/day on average). In principle, it has to be said that the AquaKat technology cannot change the chemical composition of water. The AquaKat does not take effect directly in the water, i.e. nothing is added to or taken out of the water. What the AquaKat changes is the water structure. [Read more...]
Electrochemical test of the AquaKat
July 19, 2011 By
The test with the AquaKat was very informative, as we can see from the table. Significant deviations were measured for water with and without AquaKat as well as for ice, whereby the difference for the latter is considerably bigger. For the ice tests, the water was cooled down to –18 °C and measured when thawed again. [Read more...]
Scientific experiments with the AquaKat
July 19, 2011 By
Dr. Elmar Langenscheidt from Mönchengladbach, Germany, has carried out a number of interesting experiments with the AquaKat. It was his intention to find out in which way the AquaKat might influence a liquid medium, mainly water, and how it can pass on the information modulated onto it in such a way that it shows its effects in the medium of water. For this, he uses a polarisation microscope and aqueous solutions of water and calcium carbonate as well as ascorbic acid and water. [Read more...]
Limescale free operation
July 19, 2011 By
Bakery Installation
Construction project: Thürmann (bakery chain)-branch, Markstrasse 32-34 (in the Reichelt Supermarket), 13409 Berlin, Germany. QB Plumbing and Heating Technology look after all Thürmann Ltd bakery and confectionery branch stores. Currently about 200 branches are in operation. Fresh dough is delivered to the indivudual branches from the production site and then baked in special ovens in the shops. Because the ovens operate with steam, there is always a danger of lime deposits building up quickly and, as a result, leading to expensive repairs. To prevent the formation of limescale up to now, conventional water softening systems (ion exchangers with salt/sodium chloride) were installed before each oven. This water treatment method keeps the water totally free of lime. However, this method requires annual servicing, which has associated financial and ecological costs, because the spent salt has to be disposed. [Read more...]
Sludge problem eliminated
July 19, 2011 By
Installation of AquaKat
In January 2008, a geothermal heat pump system was installed in the Boslet family home in Berlin. Because of sludge in the heating water (caused by magnetite deposits from steel radiators and iron pipes) there was a real danger that the new heat pump system could be damaged and potentially fail permaturely. Even after the system was refilled with fresh water, the same symptoms of sludge reappeared after a few weeks. As a result, a Penergetic ThermoKat device was installed in the heating cycle on 09.05.2008. To everybody’s amazement the water became totally clear after being in the system for jutst six weeks and appeared at least visually, almost equal to drinking water. [Read more...]
Elimination of sludge and limescale in pipes
July 19, 2011 By
Apartment Installation
In an apartment block with 22 units, a problem with the heating system occurred. The individual apartments are heated by in-floor heating that is supplied with hot water from a new central boiler with heat exchanger. The system is run using treated tap water according to industry standards, which means that the tap water is treated in an ion-exchange device before it is fed into the heating system. In this way, the lime content of the water is reduced, so that potential damage and loss of energy from limescale are averted. [Read more...]
Cooling lubricant trial with AquaKat on lathes
July 19, 2011 By
Lathe Cooling System Tests
An AquaKat was installed on a Monforts RNC10 lathe to test the effect on the durability of the cooling lubricant compared to an identical lathe. The AquaKat was attached to a hose on the cooling lubricant pump using two cable ties. After a trial period of six months, two samples were taken from the cooling cycles. They were sent to Fuchs Laboratories for analysis.